Ocean International
Nikol, Ahmedabad, Gujarat
GST No. 24AAEFO6278J1ZX
Call 08048871633 70% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- Two Layer Blown Film Plant
Twolayer Blown Film Machinehas a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film.
Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.
Applications ofTwolayer Blown Film Machine:-
Consumer food wrap from plastic wrap article.
Agricultural film
Bags
Industry packaging, shrink film , stretch film
Consumer packaging, food wrap, transport packaging ( Figure )
Laminating film
Barrier film
Multilayer film
Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and nanowire films.
Two Layer Blown Film PlantTwo Layer Blown Film Plant IndiaTwo Layer Blown Film Plant ManufacturerTwo Layer Blown Film MachineTwo Layer Blown Film LineTwo Layer Blown Film Plant UnitTwo Layer Blown Film Plant ExporterTwo Layer Blown Film Plant Manufacturer and ExporterTwo Layer Blown Film Plant Manufacturer Ocean International#Two #Layer #Blown #Film #Plant
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
*Your information is safe with us.
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Minimum Order Quantity | 1 Unit |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
Blown Film Line Plant Model | Screw Size (mm) | Screw L/D Ratio | Feed Section Type | Max LayFlat Width | Thickness Range (Micron) | Max Production Capacity | Total Connected Load | Blown Film Line - Dimension Of Plant | ||
(mm) | (kg/hr) | (KW) | L | W | H | |||||
OESCOBL 35-45 | 35-45 | 28:1 | Smooth Feed | 750 | 20 to 100 | 55 | 48 | 25 | 20 | 16 |
OESCOBL 45-55 | 45-55 | 28:1 | Smooth Feed | 900 | 20 to 100 | 80 | 58 | 30 | 20 | 18 |
OESCOBL 55-65 | 55-65 | 28:1 | Smooth Feed | 1200 | 20 to 100 | 120 | 65 | 35 | 23 | 20 |
OESCOBL 35-45 | 35-45 | 30:1 | Groove Feed | 800 | 20 to 100 | 90 | 64 | 25 | 20 | 18 |
OESCOBL 55-65 | 55-65 | 30:1 | Groove Feed | 1200 | 20 to 100 | 125 | 75 | 30 | 25 | 24 |
*Your information is safe with us.
| Minimum Order Quantity | 1 Unit |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
Blown Film Line Plant Model | Screw Size (mm) | Screw L/D Ratio | Feed Section Type | Max LayFlat Width | Thickness Range (Micron) | Max Production Capacity | Total Connected Load | Blown Film Line - Dimension Of Plant | ||
(mm) | (kg/hr) | (KW) | L | W | H | |||||
OESCOBL 35-45 | 35-45 | 28:1 | Smooth Feed | 750 | 20 to 100 | 55 | 48 | 25 | 20 | 16 |
OESCOBL 45-55 | 45-55 | 28:1 | Smooth Feed | 900 | 20 to 100 | 80 | 58 | 30 | 20 | 18 |
OESCOBL 55-65 | 55-65 | 28:1 | Smooth Feed | 1200 | 20 to 100 | 120 | 65 | 35 | 23 | 20 |
OESCOBL 35-45 | 35-45 | 30:1 | Groove Feed | 800 | 20 to 100 | 90 | 64 | 25 | 20 | 18 |
OESCOBL 55-65 | 55-65 | 30:1 | Groove Feed | 1200 | 20 to 100 | 125 | 75 | 30 | 25 | 24 |
| Minimum Order Quantity | 1 Unit |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
Blown Film Line Plant Model | Screw Size (mm) | Screw L/D Ratio | Feed Section Type | Max LayFlat Width | Thickness Range (Micron) | Max Production Capacity | Total Connected Load | Blown Film Line - Dimension Of Plant | ||
(mm) | (kg/hr) | (KW) | L | W | H | |||||
OESCOBL 35-45 | 35-45 | 28:1 | Smooth Feed | 750 | 20 to 100 | 55 | 48 | 25 | 20 | 16 |
OESCOBL 45-55 | 45-55 | 28:1 | Smooth Feed | 900 | 20 to 100 | 80 | 58 | 30 | 20 | 18 |
OESCOBL 55-65 | 55-65 | 28:1 | Smooth Feed | 1200 | 20 to 100 | 120 | 65 | 35 | 23 | 20 |
OESCOBL 35-45 | 35-45 | 30:1 | Groove Feed | 800 | 20 to 100 | 90 | 64 | 25 | 20 | 18 |
OESCOBL 55-65 | 55-65 | 30:1 | Groove Feed | 1200 | 20 to 100 | 125 | 75 | 30 | 25 | 24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
*Your information is safe with us.
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
*Your information is safe with us.
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
*Your information is safe with us.
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
*Your information is safe with us.
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
*Your information is safe with us.
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
*Your information is safe with us.
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
*Your information is safe with us.
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
*Your information is safe with us.
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
*Your information is safe with us.
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
*Your information is safe with us.
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
*Your information is safe with us.
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
Two Layer ABA Die Blown Film Extrusion Lines with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Extrusion Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |