Cast Film Making Machine

Extrusion Lamination Coating Machine:-

We are a leading Manufacturer & Exporter of Extrusion Lamination Coating Machine such as Extrusion Coating Lamination Machine, BOPP La Extrusion coating & laminating process .

Coating of Extrusion Lamination Coating Machine:-

The actual process of extrusion coating involves extruding resin from a slot die at temperatures up to 320°C directly onto the moving web which may then passed through a nip consisting of a  rubber  covered pressure roller and a chrome plated  cooling roll. The latter cools the molten film back into the solid state and also imparts the desired finish to the plastic surface. The web is normally run much faster than the speed at which the resin is extruded from the die, creating a coating thickness which is in proportion to the speed ratio and the slot gap.

Application of Extrusion Lamination Coating Machine:-

Paper coating and laminating

Flexible packaging

Board coating and laminating

Fabric scbrim and non-woven

Laminating of Extrusion Lamination Coating Machine

Extrusion Lamination Coating Machine is a similar process except that the extruded hot molten resin acts as the  bonding medium  to a second web of material.

Applications of Extrusion Lamination Coating Machine:-

Extrusion Lamination Coating Machine are usually custom-built and can be configured for a variety of applications including liquid packaging, aseptic drink containers, flexible packaging, toothpaste tubes, medical packaging, industrial wraps, insulation backed materials, and plastic coated tablecloths, as well as sacks for products as diverse as cement, cereal grain, and dry chemicals.

Extrusion Lamination Coating Machine deliver a combined substrate, the component elements of which would be very difficult to separate. The combined substrate inherits highly enhanced physical properties and barrier protection performance from its component elements.

Extrusion Lamination Coating Machine

Paper Coating Extrusion Lamination Machine:-

We are a leading Manufacturer & Exporter of Paper Coating Extrusion Lamination Machine such as Extrusion Coating Lamination Machine, BOPP La Extrusion coating & laminating process .

Coating of Paper Coating Extrusion Lamination Machine:-

The actual process of extrusion coating involves extruding resin from a slot die at temperatures up to 320°C directly onto the moving web which may then passed through a nip consisting of a  rubber  covered pressure roller and a chrome plated  cooling roll. The latter cools the molten film back into the solid state and also imparts the desired finish to the plastic surface. The web is normally run much faster than the speed at which the resin is extruded from the die, creating a coating thickness which is in proportion to the speed ratio and the slot gap.

Application of Paper Coating Extrusion Lamination Machine:-

Paper coating and laminating

Flexible packaging

Board coating and laminating

Fabric scbrim and non-woven

Laminating of Paper Coating Extrusion Lamination Machine:-

Paper Coating Extrusion Lamination Machine is a similar process except that the extruded hot molten resin acts as the  bonding medium  to a second web of material.

Applications of Paper Coating Extrusion Lamination Machine:-

Paper Coating Extrusion Lamination Machine are usually custom-built and can be configured for a variety of applications including liquid packaging, aseptic drink containers, flexible packaging, toothpaste tubes, medical packaging, industrial wraps, insulation backed materials, and plastic coated tablecloths, as well as sacks for products as diverse as cement, cereal grain, and dry chemicals.

Paper Coating Extrusion Lamination Machine deliver a combined substrate, the component elements of which would be very difficult to separate. The combined substrate inherits highly enhanced physical properties and barrier protection performance from its component elements.

Paper Coating Extrusion Lamination Machine

Extrusion Coating Lamination Line in Ahmedabad India:-

We are a leading Manufacturer & Extrusion Coating Lamination Line in Ahmedabad India in Ahmedabad India such as Extrusion Coating Lamination Machine, BOPP La Extrusion coating & laminating process .

Coating of Extrusion Coating Lamination Line in Ahmedabad India:-

The actual process of extrusion coating involves extruding resin from a slot die at temperatures up to 320°C directly onto the moving web which may then passed through a nip consisting of a  rubber  covered pressure roller and a chrome plated  cooling roll. The latter cools the molten film back into the solid state and also imparts the desired finish to the plastic surface. The web is normally run much faster than the speed at which the resin is extruded from the die, creating a coating thickness which is in proportion to the speed ratio and the slot gap.

Application of Extrusion Coating Lamination Line in Ahmedabad India:-

Paper coating and laminating

Flexible packaging

Board coating and laminating

Fabric scbrim and non-woven

Laminating of Extrusion Coating Lamination Line in Ahmedabad India:-

Extrusion Coating Lamination Line in Ahmedabad India is a similar process except that the extruded hot molten resin acts as the  bonding medium  to a second web of material.

Applications of Extrusion Coating Lamination Line in Ahmedabad India:-

Extrusion Coating Lamination Line in Ahmedabad India are usually custom-built and can be configured for a variety of applications including liquid packaging, aseptic drink containers, flexible packaging, toothpaste tubes, medical packaging, industrial wraps, insulation backed materials, and plastic coated tablecloths, as well as sacks for products as diverse as cement, cereal grain, and dry chemicals.

Extrusion Coating Plant deliver a combined substrate, the component elements of which would be very difficult to separate. The combined substrate inherits highly enhanced physical properties and barrier protection performance from its component elements.

Extrusion Coating Lamination Line in Ahmedabad India

Extrusion Film Coating Lamination Machine:-

We are a leading Manufacturer & Exporter of Extrusion Coating Lamination Plant such as Extrusion Coating Lamination Machine, BOPP La Extrusion coating & laminating process .

Coating of Extrusion Film Coating Lamination Machine

The actual process of extrusion coating involves extruding resin from a slot die at temperatures up to 320°C directly onto the moving web which may then passed through a nip consisting of a  rubber  covered pressure roller and a chrome plated  cooling roll. The latter cools the molten film back into the solid state and also imparts the desired finish to the plastic surface. The web is normally run much faster than the speed at which the resin is extruded from the die, creating a coating thickness which is in proportion to the speed ratio and the slot gap.

Application of Extrusion Film Coating Lamination Machine:-

Paper coating and laminating

Flexible packaging

Board coating and laminating

Fabric scbrim and non-woven

Laminating of Extrusion Film Coating Lamination Machine

Extrusion Film Coating Lamination Machine is a similar process except that the extruded hot molten resin acts as the  bonding medium  to a second web of material.

Applications of Extrusion Film Coating Lamination Machine:-

Extrusion Film Coating Lamination Machine are usually custom-built and can be configured for a variety of applications including liquid packaging, aseptic drink containers, flexible packaging, toothpaste tubes, medical packaging, industrial wraps, insulation backed materials, and plastic coated tablecloths, as well as sacks for products as diverse as cement, cereal grain, and dry chemicals.

Extrusion Film Coating Lamination Machine deliver a combined substrate, the component elements of which would be very difficult to separate. The combined substrate inherits highly enhanced physical properties and barrier protection performance from its component elements.
Extrusion Film Coating Lamination Machine

Ld Extrusion Coating Lamination Machine:-

We are a leading Manufacturer & Exporter of Ld Extrusion Coating Lamination Machine such as Extrusion Coating Lamination Machine, BOPP La Extrusion coating & laminating process .

Coating of Ld Extrusion Coating Lamination Machine:-

The actual process of extrusion coating involves extruding resin from a slot die at temperatures up to 320°C directly onto the moving web which may then passed through a nip consisting of a  rubber  covered pressure roller and a chrome plated  cooling roll. The latter cools the molten film back into the solid state and also imparts the desired finish to the plastic surface. The web is normally run much faster than the speed at which the resin is extruded from the die, creating a coating thickness which is in proportion to the speed ratio and the slot gap.

Application of Ld Extrusion Coating Lamination Machine:-

Paper coating and laminating

Flexible packaging

Board coating and laminating

Fabric scbrim and non-woven

Laminating of Ld Extrusion Coating Lamination Machine:-

Extrusion Coating Plant is a similar process except that the extruded hot molten resin acts as the  bonding medium  to a second web of material.

Applications of Ld Extrusion Coating Lamination Machine:-

Ld Extrusion Coating Lamination Machine are usually custom-built and can be configured for a variety of applications including liquid packaging, aseptic drink containers, flexible packaging, toothpaste tubes, medical packaging, industrial wraps, insulation backed materials, and plastic coated tablecloths, as well as sacks for products as diverse as cement, cereal grain, and dry chemicals.

Ld Extrusion Coating Lamination Machine deliver a combined substrate, the component elements of which would be very difficult to separate. The combined substrate inherits highly enhanced physical properties and barrier protection performance from its component elements.

Ld Extrusion Coating Lamination Machine

Extrusion Coating Lamination Plant Manufacturer:-

We are a leading Manufacturer & Extrusion Coating Lamination Plant Manufacturer such as Extrusion Coating Lamination Machine, BOPP La Extrusion coating & laminating process .

Coating of Extrusion Coating Lamination Plant Manufacturer

The actual process of Extrusion Coating Lamination Plant Manufacturer involves extruding resin from a slot die at temperatures up to 320°C directly onto the moving web which may then passed through a nip consisting of a  rubber  covered pressure roller and a chrome plated  cooling roll. The latter cools the molten film back into the solid state and also imparts the desired finish to the plastic surface. The web is normally run much faster than the speed at which the resin is extruded from the die, creating a coating thickness which is in proportion to the speed ratio and the slot gap.

Application of Extrusion Coating Lamination Plant Manufacturer:-

Paper coating and laminating

Flexible packaging

Board coating and laminating

Fabric scbrim and non-woven

Laminating of Extrusion Coating Lamination Plant Manufacturer:-

Extrusion Coating Lamination Plant Manufacturer is a similar process except that the extruded hot molten resin acts as the  bonding medium  to a second web of material.

Applications of Extrusion Coating Lamination Plant Manufacturer:-

Extrusion Coating Lamination Plant Manufacturer are usually custom-built and can be configured for a variety of applications including liquid packaging, aseptic drink containers, flexible packaging, toothpaste tubes, medical packaging, industrial wraps, insulation backed materials, and plastic coated tablecloths, as well as sacks for products as diverse as cement, cereal grain, and dry chemicals.

Extrusion Coating Lamination Plant Manufacturer deliver a combined substrate, the component elements of which would be very difficult to separate. The combined substrate inherits highly enhanced physical properties and barrier protection performance from its component elements.

Extrusion Coating Lamination Plant in India:-

We are a leading Manufacturer & Exporter of Extrusion Coating Lamination Plant in India such as Extrusion Coating Lamination Machine, BOPP La Extrusion coating & laminating process .

Coating of Extrusion Coating Lamination Plant in India:-

The actual process of extrusion coating involves extruding resin from a slot die at temperatures up to 320°C directly onto the moving web which may then passed through a nip consisting of a  rubber  covered pressure roller and a chrome plated  cooling roll. The latter cools the molten film back into the solid state and also imparts the desired finish to the plastic surface. The web is normally run much faster than the speed at which the resin is extruded from the die, creating a coating thickness which is in proportion to the speed ratio and the slot gap.

Application of Extrusion Coating Lamination Plant in India:-

Paper coating and laminating

Flexible packaging

Board coating and laminating

Fabric scbrim and non-woven

Laminating of Extrusion Coating Lamination Plant in India:-

Extrusion Coating Lamination Plant in India is a similar process except that the extruded hot molten resin acts as the  bonding medium  to a second web of material.

Applications of Extrusion Coating Lamination Plant in India:-

Extrusion Coating Lamination Plant in India are usually custom-built and can be configured for a variety of applications including liquid packaging, aseptic drink containers, flexible packaging, toothpaste tubes, medical packaging, industrial wraps, insulation backed materials, and plastic coated tablecloths, as well as sacks for products as diverse as cement, cereal grain, and dry chemicals.

Extrusion Coating Lamination Plant in India deliver a combined substrate, the component elements of which would be very difficult to separate. The combined substrate inherits highly enhanced physical properties and barrier protection performance from its component elements.
Extrusion Coating Lamination Plant in India

1. 1. Introduction of High Speed Stretch Film Making Plant

High Speed Stretch Film Making Plant mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
Double layers PE Cast Film Machine
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of High Speed Stretch Film Making Plant:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of High Speed Stretch Film Making Plant
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Features of High Speed Stretch Film Making Plant
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of High Speed Stretch Film Making Plant:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of Stretch Film Cling Film Machinecast-film extrusion machine, cast-film extruder, cast-film extruding line Automatic Casting PE Film Machine Automatic Casting.
High Speed Stretch Film Making Plant

1. 1. Introduction of High Speed Stretch Film Making Machinery

High Speed Stretch Film Making Machinery mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
Double layers PE Cast Film Machine
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of High Speed Stretch Film Making Machinery:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of High Speed Stretch Film Making Machinery
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Features of High Speed Stretch Film Making Machinery
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of High Speed Stretch Film Making Machinery:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of Stretch Film Cling Film Machinecast-film extrusion machine, cast-film extruder, cast-film extruding line Automatic Casting PE Film Machine Automatic Casting.

1. 1. Introduction of Automatic High Speed Cast Film Making Plant

Automatic High Speed Cast Film Making Plant mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
Automatic High Speed Cast Film Making Plant
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of Automatic High Speed Cast Film Making Plant:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of Automatic High Speed Cast Film Making Plant
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Features of Automatic High Speed Cast Film Making Plant
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of Automatic High Speed Cast Film Making Plant:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of Stretch Film Cling Film Machinecast-film extrusion machine, cast-film extruder, cast-film extruding line Automatic Casting PE Film Machine Automatic Casting.

1. 1. Introduction of Automatic High Speed Cast Film Making Machinery

Automatic Automatic High Speed Cast Film Making Machinery mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
Automatic High Speed Cast Film Making Machinery
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of Automatic High Speed Cast Film Making Machinery:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of Automatic High Speed Cast Film Making Machinery
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Features of Automatic High Speed Cast Film Making Machinery
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of Automatic High Speed Cast Film Making Machinery:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of Stretch Film Cling Film Machinecast-film extrusion machine, cast-film extruder, cast-film extruding line Automatic High Speed Cast Film Making Machinery Automatic Casting.
Automatic High Speed Cast Film Making Machinery

1. 1. Introduction of Fully Automatic Stretch Film Making Plant

Fully Automatic Stretch Film Making Plant mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
Fully Automatic Stretch Film Making Plant
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of Fully Automatic Stretch Film Making Plant
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of Fully Automatic Stretch Film Making Plant
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Features of Fully Automatic Stretch Film Making Plant
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of Stretch Film Making Machine in Ahmedabad:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of Stretch Film Cling Film Machinecast-film extrusion machine, cast-film extruder, cast-film extruding line Automatic Casting PE Film Machine Automatic Casting.
Fully Automatic Stretch Film Making Plant

1. 1. Introduction of Fully Automatic Stretch Film Making Machinery

Fully Automatic Stretch Film Making Machinery mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
Double layers PE Cast Film Machine
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of Fully Automatic Stretch Film Making Machinery:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of Fully Automatic Stretch Film Making Machinery
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Fully Automatic Stretch Film Making Machinery
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of Fully Automatic Stretch Film Making Machinery:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of Fully Automatic Stretch Film Making Machinery cast-film extrusion machine, cast-film extruder, cast-film extruding line Automatic Casting PE Film Machine Automatic Casting.

1. 1. Introduction of High Production Stretch Film Making Plant

High Production Stretch Film Making Plant mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
High Production Stretch Film Making Plant
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of High Production Stretch Film Making Plant:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of High Production Stretch Film Making Plant
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Features of High Production Stretch Film Making Plant
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of High Production Stretch Film Making Plant:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of High Production Stretch Film Making Plant cast-film extrusion machine, cast-film extruder, cast-film extruding line Automatic Casting PE Film Machine Automatic Casting.
High Production Stretch Film Making Plant

1. 1. Introduction of High Production Stretch Film Making Machinery

High Production Stretch Film Making Machinery mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
Double layers High Production Stretch Film Making Machinery: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of High Production Stretch Film Making Machinery:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of High Production Stretch Film Making Machinery
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Features of High Production Stretch Film Making Machinery
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of High Production Stretch Film Making Machinery:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of High Production Stretch Film Making Machinery cast-film extrusion machine, cast-film extruder, cast-film extruding line Automatic Casting PE Film Machine Automatic Casting.

1. 1. Introduction of in India Automatic High Speed Stretch Film Making Plant

in India Automatic High Speed Stretch Film Making Plant mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
Double layers PE Cast Film Machine
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of in India Automatic High Speed Stretch Film Making Plant:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of in India Automatic High Speed Stretch Film Making Plant
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Features of in India Automatic High Speed Stretch Film Making Plant
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of Stretch Film Making Machine in Ahmedabad:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of Stretch Film Cling Film Machinecast-film extrusion machine, cast-film extruder, cast-film extruding line Automatic Casting PE Film Machine Automatic Casting.
in India Automatic High Speed Stretch Film Making Plant

1. 1. Introduction of in Ahmadabad Fully Automatic High Speed Stretch Film Making Plant

in Ahmadabad Fully Automatic High Speed Stretch Film Making Plant mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
Double layers PE Cast Film Machine
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of in Ahmadabad Fully Automatic High Speed Stretch Film Making Plant:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of in Ahmadabad Fully Automatic High Speed Stretch Film Making Plant
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Features of in Ahmadabad Fully Automatic High Speed Stretch Film Making Plant
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of in Ahmadabad Fully Automatic High Speed Stretch Film Making Plant:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of Stretch Film Cling Film Machinecast-film extrusion machine, cast-film extruder, cast-film extruding line in Ahmadabad Fully Automatic High Speed Stretch Film Making Plant Automatic Casting.
in Ahmadabad Fully Automatic High Speed Stretch Film Making Plant

1. 1. Introduction of in Ahmadabad Fully Automatic High Speed Stretch Film Making Line

in Ahmadabad Fully Automatic High Speed Stretch Film Making Line mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
Double layers PE Cast Film Machine
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of in Ahmadabad Fully Automatic High Speed Stretch Film Making Line:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of in Ahmadabad Fully Automatic High Speed Stretch Film Making Line
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Features of in Ahmadabad Fully Automatic High Speed Stretch Film Making Line
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of in Ahmadabad Fully Automatic High Speed Stretch Film Making Line:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of Stretch Film Cling Film Machinecast-film extrusion machine, cast-film extruder, cast-film extruding line in Ahmadabad Fully Automatic High Speed Stretch Film Making Line Automatic Casting.

in Ahmadabad Fully Automatic High Speed Stretch Film Making Line

1. 1. Introduction of in India Automatic High Speed Stretch Film Making Machinery

in India Automatic High Speed Stretch Film Making Machinery mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
Double layers PE Cast Film Machine
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: 2 layers (one side sticky or two sides sticky stretch film)
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of in India Automatic High Speed Stretch Film Making Machinery:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of in India Automatic High Speed Stretch Film Making Machinery
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Features of in India Automatic High Speed Stretch Film Making Machinery
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of Stretch Film Making Machine in Ahmedabad:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of Stretch Film Cling Film Machinecast-film extrusion machine, cast-film extruder, cast-film extruding line Automatic Casting PE Film Machine Automatic Casting.

1. 1. Introduction of in Ahmadabad High Speed Stretch Film Making Machine

in Ahmadabad High Speed Stretch Film Making Machine mainly use LLDPE, LDPE or recycled LLDPE material to produce one side sticky or 2 sides sticky stretch film, cling film, cast stretch film etc. The width from 20mm to 2000mm, single layer to 2 layers, 3 layers, 5layers and so on.
in Ahmadabad High Speed Stretch Film Making Machine
Main parts: One electrical power control box, 2 extruders, one die, 2 cooling forming rollers, on-line recycling system, auto-cutting system, auto-winding system, 2 winding shafts etc.
Layers to be produced: in Ahmadabad High Speed Stretch Film Making Machine
Spare parts: All advanced spare parts are imported from Japan, Taiwan, China brand parts etc.
Width to be produced: Min 20mm to max 1500mm.


Thickness to be produced: 0.01mm-0.05mm
2. Use of in Ahmadabad High Speed Stretch Film Making Machine:
1) The most usage pallet packaging: Such as fertile, cement, chemicalindustrial raw material, building material etc. 
2) Horizontal packaging: Metal pipe, aluminum alloy material, timber etc. 
3) Rotational twist: Rolling paper, carpet etc. 
4) Binding: Glass container, acceptance etc. 
5) Break-bulk packaging: Soybean, grain, plastic particle etc. 
6) Storage packaging: Such as grass. 
7) Manual packaging: It is used in wholesales, journal, printing, electronic product, foodstuff etc. 
8) Ring twist packaging: Type, wire, cable, steel silk etc.

3. Finished Products of in Ahmadabad High Speed Stretch Film Making Machine
The finished product of this machine is called stretch film, cast stretch film, cling film in different countries. It is a very good kind of packaging material mostly used in the industrial field, port pallet packaging, , building material packaging, hardware packaging etc. It enjoys the following advantages:
Good tensile strength
Superior anti-pricking ability
High transparency
Good ductility and anti-impact strength
Stable sticky sides etc.

4. Outstanding Features of in Ahmadabad High Speed Stretch Film Making Machine
Higher output with stable quality stretch film, superior than the same suppliers more than 30%.
Higher speed with good ideal tensil and anti-pricking stretch film, which make sure the machine make big output.
Good water cooling effect and imported die steel to ensure making even and good ductility stretch film.
Swing system installed to adjust the film thickness and evenness.
The alloy screw adopts special mixing function and high plasticizing design which combine import static mixer to ensure plasticization is great, color is uniform and increase extrusion capacity greatly.
PLC controlled, fully automatic.

5. Packaging Condition of in Ahmadabad High Speed Stretch Film Making Machine:
1) Packed fully with EPE foam, blanketry and stretch film.
2) Wire netting fastened at the bottom of the container.
6. Delivery Time of Stretch Film Cling Film Machinecast-film extrusion machine, cast-film extruder, cast-film extruding line Automatic Casting PE Film Machine Automatic Casting.
in Ahmadabad High Speed Stretch Film Making Machine