Ocean International
Ocean International
Odhav, Ahmedabad, Gujarat
Send SMS
Send E-mail

Blown Film Line

Blown Film Line Manufacturer by Ocean International ;

Ocean International offers widest range of customized Blown Film Line, to suit a broad spectrum of resins, applications and output levels. Customers opting for can therefore be sure to produce best film quality with economical use of resources, short start-up and low change-over times as well as reduced waste and high productivity.

Blown Film Line - series of Blown Film Line are available with outputs ranging from 30 kg/hr to 1000 kg/hr and lay-flat widths ranging from 50 mm to 5000 mm for processing polymers as diverse as LD, LLD, HM - HDPE, PP. FOILEX – Blown Film Line are also available in special configurations to process HDPE rich films both through high stalk bubble and low frost line height bubbles. Blown Film Line incorporates advanced features like-grooved feed section, barrier screw, gravimetric blending/dosing system, Liquid PIB dosing system, manual as well as pneumatic screen changer, oscillating haul-off, internal bubble cooling, automatic bubble cage, online thickness monitoring and control and surface winders with taper tension control.

Application ofBlown Film Line

· Carry bags

· Shopping bags

· Water Pouches

· Garbage Bags

· Shrink Wrap Film

· Oil Packaging

· Milk Packaging

· Liners


Request CallBack
  • Multilayer Blown Film Line
  • Multilayer Blown Film Line
  • Multilayer Blown Film Line
  • Multilayer Blown Film Line
Multilayer Blown Film Line
Get Best Quote

Multilayer Blown Film Line

Approx. Price: Rs 55.51 Lakh / UnitGet Latest Price
Product Details:
Minimum Order Quantity1 Unit
BrandOCEAN INTERNATIONAL
Power Consumption146 - 194 ( kw )
Production Capacity150 - 300 ( kg/hr )
Power SourceElectric
ColorBLUE / WHITE
MaterialLD/ PP/ HM/ Biodegradable
Automation GradeAutomatic
Plastic ProcessedEXTRUDER
MaintenanceNo Maintenance
Lay Flat Width Range600 - 1250 to 11400 - 2100 ( mm )
Dimensions16 X 10 X 12 to 18 X 10 X 14 ( L X W X H )
Voltage146 - 194 ( kw )
Film Thickness20 - 150 ( Micron )
Screw Diameter55 - 65 - 55 ( mm )
I deal inNew Only

Multilayer Blown Film Line mono layer LDPE strech film making machine stretch film extrusion machine Blown Film Machine Manufacturer Two Color blown film machine Two Color blown film machine Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films

Multilayer Blown Film Line

3 Layer #Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and #monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant #ABA Multi layer Blown Film Machine Layer Film Line blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing #machinery Multilayer #co-extrusion blown film machine #PE Blown film machine, Plastic processing machinery, #Multilayer co-extrusion blown film #machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line #plastic film extruder PP blown film line, #LDPE blown film machine, #Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film #plant, #PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film #line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film Line

Applications of Multilayer Blown Film Line :-

Packaging films

Lamination films

Printing films

 Industrial films

Converter-grade films

Multilayer Blown Film Line for HDPE,LDPE,LLDPE,PP,Multi Layer Blown Film Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Two Screw 3 Layer Film Extruding Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,LDPE Shrinkable Film Multilayer Blown Film Line of :-
HDPE,LDPE,LLDPE,PP,Mini Type HDPE Blown Film Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Mini Type HDPE Blown Film Machine (Auto Winder)

 Multilayer Blown Film Line

Blown Film Extrusion Machine for Multilayer Blown Film Line :-HDPE,LDPE,LLDPE,PP,HDPE,LDPE,LLDPE Blown Film Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,LDPE Blown Film Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine with Hot Sealer Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine with Hot Sealer & 1 Color Printer Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,PP Blown Film Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Two Color Striped Blown Film Machine Blown Film Extrusion Machine for Multilayer Blown Film Line :-


Additional Information:
  • Production Capacity: 150 - 300 ( kg/hr )
  • Delivery Time: 90 ( Days )
Yes! I am interested
View PDF Watch Video
Request CallBack
  • Three Layer Blown Film Plant
  • Three Layer Blown Film Plant
  • Three Layer Blown Film Plant
  • Three Layer Blown Film Plant
Three Layer Blown Film Plant
Get Best Quote

Three Layer Blown Film Plant

Approx. Price: Rs 55.51 Lakh / UnitGet Latest Price
Product Details:
Minimum Order Quantity1 Unit
Capacity150 - 300 ( kg/hr )
Automatic GradeAutomatic
Output150 - 300 ( kg/hr )
Machine Power146 - 194 ( kw )
Material to be ExtrudedPlastic
Body MaterialMS
Voltage146 - 194 ( kw )
ColorBLUE / WHITE
BrandOcean International
Three Layer Blown Film Plant

THREE LAYER BLOWN FILM PLANT – MACHINE – LINE – PRESS

Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

Multilayer blown film material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Multilayer Blown Film Plant is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer blown film line can also be produced with this machine.

 

Ocean extrusions is a leading plastic extrusion machinery manufacturer & exporter in India, having core expertise in comprehensive range of extrusion machinery for plastic including plastic extruder such as multi layer blown film plant, mono layer blown film plant, air bubble sheet plant, raffia tape stretching plant, extrusion coating lamination plant, co-extrusion two layer blown film plant, PP-TQ blown film plant, monofilament plant, sutli plant, PP box strapping line, HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions Pvt Ltd is a well known trusted name for providing customized solutions of plastic extrusion machineries.

Other Details:

•       Minimise the cost of raw material.

•       Combination of different raw material.

•       Oscillating take-off unit is equip for get uniformly thickness of the film.

•       Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.

•       Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.

•       This machine could be combined different characteristics of plastic raw material in the same work.

•       Oscillating take-off unit is driven by heavy duty gear transmission system.

•       The gear transmission which is well precision and good stability can make the film more uniform of the thickness.

•       Its rotational angle could be attained to 359°.

•       It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.

•       Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.

 

Application:

•       Water Pouch Film

•       Milk Film

•       Edible Oil Film

•       Lamination Film

•       Liquid Packaging

•       Tea Packaging

•       Tomato Catch Up Packaging

•       Food Packaging Film

•       Stretch Cling Film


Additional Information:
  • Production Capacity: 150 - 300 ( kg/hr )
  • Delivery Time: 90 ( Days )
Yes! I am interested
Watch Video
Request CallBack
  • Three Layer Blown Film Line
  • Three Layer Blown Film Line
  • Three Layer Blown Film Line
  • Three Layer Blown Film Line
Three Layer Blown Film Line
Get Best Quote

Three Layer Blown Film Line

Approx. Price: Rs 55.51 Lakh / UnitGet Latest Price
Product Details:
Minimum Order Quantity1 Unit
BrandOCEAN INTERNATIONAL
Power Consumption146 - 194 ( kw )
Production Capacity150 - 300 ( kg/hr )
ColorBLUE / WHITE
Voltage146 - 194 ( kw )
Plastic ProcessedEXTRUDER
MaintenanceNo Maintenance
Dimensions16 X 10 X 12 to 18 X 10 X 14 ( L X W X H )

Introduction of Three Layer Blown Film Line :-

Three Layer Blown Film Line is a technology that is the most common method to make plastic  films, especially for the packaging industry. The process involves extruding a tube of molten polumer  through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene  is used with this process, and other materials can be used as blends with these polymers. A diagram of a blowing film process.

The Three Layer Blown Film Line

Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common.

This procedure consists of four main steps:

The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous   liquid . This molten plastic is then forced, or extruded , through an annular die.

Air is injected through a hole in the center of the die , and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film.

Three Layer Blown Film Line
The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter.

Three Layer Blown Film Line

After solidification t the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated.

 Three Layer Blown Film Line

Advantages of Three Layer Blown Film Line :-

Three Layer Blown Film Line generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film.

Three Layer Blown Film Line can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.

 

Applications of Three Layer Blown Film Line :-

Consumer food wrap from plastic wrap  article.

Agricultural  film

Bags

Industry packaging, shrink film , stretch film

Consumer packaging, food wrap, transport packaging ( Figure  )

Laminating  film

Barrier film

Multilayer film 

Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and  nanowire films.


Additional Information:
  • Production Capacity: 150 - 300 ( kg/hr )
  • Delivery Time: 90 ( Days )
Yes! I am interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Blown Film Plant
  • Blown Film Plant
  • Blown Film Plant
  • Blown Film Plant
Blown Film Plant
Get Best Quote

Blown Film Plant

Approx. Price: Rs 55.51 Lakh / UnitGet Latest Price
Product Details:
Minimum Order Quantity1 Unit
BrandOCEAN INTERNATIONAL
Production Capacity150 - 300 ( kg/hr )
Power Consumption146 - 194 ( kw )
ColorBLUE / WHITE
Voltage146 - 194 ( kw )
Plastic ProcessedEXTRUDER
MaintenanceNo Maintenance
Dimensions16 X 10 X 12 to 18 X 10 X 14 ( L X W X H )
Range Of Thickness Of Wall Ceiling Panels20 - 150 ( Micron )
Blown Film Plant

Blown Film Plant mono layer LDPE strech film making machine stretch film extrusion machine Blown Film Machine Manufacturer Two Color blown film machine Two Color blown film machine Multi layer co-extrusion blown film lines are available in a wide range of configurations from two to nine layers to produce variety of films like lamination grade films, liquid packaging films, ultra high barrier films, high dart FFS resin sacks films, meat and cereal packaging films, oil packaging films, pharma and medical grade films, pallet hooding shrink/stretch films, green house films, silage and mulch films, geomembrane and chemical / soap packaging films

 Blown Film Plant

3 Layer #Co-extrusion Plastic Blown Film machine Polypropylene Blown Film Plant blown film plant, blown film plant, blown film extruder, blown film extrusion machine and #monolayer blown film extrusion line for plastic film, tubing and bags. Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line including multi layer blown film plant, raffia tape lines, air bubble sheet plant, PP HDPE box strapping plant #ABA Multi layer Blown Film Machine Layer Film Line blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing #machinery Multilayer #co-extrusion blown film machine #PE Blown film machine, Plastic processing machinery, #Multilayer co-extrusion blown film #machine, HDPE /LDPE blown film machine and LDPE/LLDPE/HDPE Blown Film line #plastic film extruder PP blown film line, #LDPE blown film machine, #Plastic Film Extruder, Lab Film Extruders, Rotating Die, blown film #plant, #PP blown film line, LDPE blown film machine, HDPE blown film plant, LLDPE film Two Layer Blown Film Plant India, Two Layer Plastic Garbage Bags plants Manufacturers, two layer blown film line with wide width and the features of two layer blown film #line is low investment, power efficient and high - speed plants and it is used for various industries such as Film for Shopping Bags, Shrink Film, Biodegradable Film, Lamination Film two layer blown film line Wide Width LLDPE Blown Film Plant carry bag making machine blown film plant Multilayer Blown Film Plant

 

Applications of Blown Film Plant :-

Packaging films

Lamination films

Printing films

 Industrial films

Converter-grade films

Blown Film Plant for HDPE,LDPE,LLDPE,PP,Multi Layer Blown Film Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Two Screw 3 Layer Film Extruding Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,LDPE Shrinkable Film Blown Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Mini Type HDPE Blown Film Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Mini Type HDPE Blown Film Machine (Auto Winder)

Blown Film Plant for HDPE,LDPE,LLDPE,PP,HDPE,LDPE,LLDPE Blown Film Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,LDPE Blown Film Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine with Hot Sealer Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,HDPE Blown Film Machine with Hot Sealer & 1 Color Printer Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,PP Blown Film Machine Blown Film Extrusion Machine for HDPE,LDPE,LLDPE,PP,Two Color Striped Blown Film Plant Blown Film Extrusion Machine for Blown Film Plant.


Additional Information:
  • Production Capacity: 150 - 300 ( kg/hr )
  • Delivery Time: 90 ( Days )
Yes! I am interested
View PDF Watch Video
Request CallBack
  • Three Layer Blown Film Machine
  • Three Layer Blown Film Machine
  • Three Layer Blown Film Machine
  • Three Layer Blown Film Machine
Three Layer Blown Film Machine
Get Best Quote

Three Layer Blown Film Machine

Approx. Price: Rs 55.51 Lakh / UnitGet Latest Price
Product Details:
Minimum Order Quantity1 Unit
BrandOCEAN INTERNATIONAL
Power Consumption146 - 194 ( kw )
Production Capacity150 - 300 ( kg/hr )
Power SourceElectric
ColorBLUE / WHITE
Voltage146 - 194 ( kw )
MaterialLD/ PP/ HM/ Biodegradable
Automation GradeAutomatic
Plastic ProcessedEXTRUDER
Lay Flat Width Range600 - 1250 to 11400 - 2100 ( mm )
MaintenanceNo Maintenance
Dimensions16 X 10 X 12 to 18 X 10 X 14 ( L X W X H )
Range Of Thickness Of Wall Ceiling Panels20 - 150 ( Micron )
Film Thickness20 - 150 ( Micron )
Screw Diameter55 - 65 - 55 ( mm )
Three Layer Blown Film Making Machine

Introduction of Three Layer Blown Film Making Machine :-

Three Layer Blown Film Making Machine is a technology that is the most common method to make plastic films, especially for the packaging industry. The process involves extruding a tube of molten polumer through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene is used with this process, and other materials can be used as blends with these polymers. A diagram of a blowing film process.

The Film Blowing Process of Three Layer Blown Film Making Machine :-

Three Layer Blown Film Making Machine

Typically, Three Layer Blown Film Making Machine is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common.

This procedure consists of four main steps:

The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous liquid . This molten plastic is then forced, or extruded , through an annular die.

Air is injected through a hole in the center of the die , and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film.

The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter.

After solidification t the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated.

Three Layer Blown Film Making Machine

Advantages of Three Layer Blown Film Making Machine :-

Blown film generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film.

Three Layer Blown Film Making Machine can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.

Three Layer Blown Film Making Machine

Applications of Three Layer Blown Film Making Machine :-

Consumer food wrap from plastic wrap article.

Agricultural film

Bags

Industry packaging, shrink film , stretch film

Consumer packaging, food wrap, transport packaging ( Figure )

Laminating film

Barrier film

Multilayer film


Additional Information:
  • Production Capacity: 150 - 300 ( kg/hr )
  • Delivery Time: 90 ( Days )
Yes! I am interested
Watch Video
Request CallBack
  • Multi Layer Blown Film Plant
  • Multi Layer Blown Film Plant
  • Multi Layer Blown Film Plant
  • Multi Layer Blown Film Plant
Multi Layer Blown Film Plant
Get Best Quote

Multi Layer Blown Film Plant

Approx. Price: Rs 55.51 Lakh / UnitGet Latest Price
Product Details:
Minimum Order Quantity1 Unit
BrandOCEAN INTERNATIONAL
Capacity150 - 300 ( kg/hr )
Power Consumption146 - 194 ( kw )
Driven TypeElectrical
Production Capacity150 - 300 ( kg/hr )
Lay Flat Width600 - 1250 to 11400 - 2100 ( mm )
ColorBLUE / WHITE
Power SourceElectric
MaterialLD/ PP/ HM/ Biodegradable
Plastic ProcessedEXTRUDER
Automation GradeAutomatic
Lay Flat Width Range600 - 1250 to 11400 - 2100 ( mm )
Voltage146 - 194 ( kw )
MaintenanceNo Maintenance
Dimensions16 X 10 X 12 to 18 X 10 X 14 ( L X W X H )
Film Thickness20 - 150 ( Micron )
Screw Diameter55 - 65 - 55 ( mm )

Introduction of Multi Layer Blown Film Plant :-

Multi Layer Blown Film Plant is a technology that is the most common method to make plastic films, especially for the packaging industry. The process involves extruding a tube of molten polumer through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene is used with this process, and other materials can be used as blends with these polymers. A diagram of a Multi Layer Blown Film Plant.

The Multi Layer Blown Film Plant

Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common.

This procedure consists of four main steps:

The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous liquid . This molten plastic is then forced, or extruded , through an annular die.

Air is injected through a hole in the center of the die , and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film.

The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter.

After solidification t the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated.

Multi Layer Blown Film Plant

Advantages of Multi Layer Blown Film Plant :-

Multi Layer Blown Film Plant generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film.

Multi Layer Blown Film Plant can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.


Applications of Multi Layer Blown Film Plant :-

Consumer food wrap from plastic wrap article.

Agricultural film

Bags

Industry packaging, shrink film , stretch film

Consumer packaging, food wrap, transport packaging ( Figure )

Laminating film

Barrier film

Multi Layer Blown Film Plant

Additional Information:
  • Production Capacity: 150 - 300 ( kg/hr )
  • Delivery Time: 90 ( Days )
Yes! I am interested
View PDF Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Blown Film Machine
  • Blown Film Machine
  • Blown Film Machine
  • Blown Film Machine
Blown Film Machine
Get Best Quote

Blown Film Machine

Approx. Price: Rs 55.51 Lakh / UnitGet Latest Price
Product Details:
Minimum Order Quantity1 Unit
BrandOCEAN INTERNATIONAL
Power Consumption146 - 194 ( kw )
Production Capacity150 - 300 ( kg/hr )
Power SourceElectric
Voltage146 - 194 ( kw )
ColorBLUE / WHITE
MaterialLD/ PP/ HM/ Biodegradable
Automation GradeAutomatic
Plastic ProcessedEXTRUDER
Lay Flat Width Range600 - 1250 to 11400 - 2100 ( mm )
MaintenanceNo Maintenance
Dimensions16 X 10 X 12 to 18 X 10 X 14 ( L X W X H )
Film Thickness20 - 150 ( Micron )
Screw Diameter55 - 65 - 55 ( mm )

Introduction of Blown Film Machine :-

Blown film extrusion is a technology that is the most common method to make plastic  films, especially for the packaging industry. The process involves extruding a tube of molten polumer  through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene  is used with this process, and other materials can be used as blends with these polymers. A diagram of a blowing film process.

The Film Blowing Process of Blown Film Machine :- 

Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common.

This procedure consists of four main steps:

The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous   liquid . This molten plastic is then forced, or extruded , through an annular die.

Air is injected through a hole in the center of the die , and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film.

The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter.

After solidification t the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated.

 Blown Film Machine

Advantages of Blown Film Machine :-

Blown Film Machine generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film.

Blown Film Machine can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of Blown Film Machine is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.

 Blown Film Machine

Applications of Blown Film Machine :-

Consumer food wrap from plastic wrap  article.

Agricultural  film

Bags

Industry packaging, shrink film , stretch film

Consumer packaging, food wrap, transport packaging ( Figure  )

Laminating  film

Barrier film

Multilayer film 

Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and  nanowire films.


Additional Information:
  • Production Capacity: 150 - 300 ( kg/hr )
  • Delivery Time: 90 ( Days )
Yes! I am interested
Watch Video
Request CallBack
  • Blown Film Line
  • Blown Film Line
  • Blown Film Line
  • Blown Film Line
Blown Film Line
Get Best Quote

Blown Film Line

Approx. Price: Rs 55.51 Lakh / UnitGet Latest Price
Product Details:
Minimum Order Quantity1 Unit
BrandOCEAN INTERNATIONAL
Production Capacity150 - 300 ( kg/hr )
Plastic TypePP, LD,HM,BIODEGRADABLE
Power Consumption146 - 194 ( kw )
Capacity150 - 300 ( kg/hr )
ColorBLUE / WHITE
Voltage146 - 194 ( kw )
Plastic ProcessedEXTRUDER
MaintenanceNo Maintenance
Dimensions16 X 10 X 12 to 18 X 10 X 14 ( L X W X H )
Automatic GradeAutomatic
Blown Film Line

Blown Film Line. This blown film plant is checked at our end on various parameters in order to deliver a flawless range. Offered blown film plant is developed by our skilled professionals utilizing the advanced technology and superior grade raw material. Customers can avail this blown film plant from us in various specifications at market rates.

Features of 
Blown Film Line :-

•       Light weight

•       Easy to install

•       Long service life


Other Details of 
Blown Film Line :- 

•       Minimise the cost of raw material.

•       Combination of different raw material.

•       Oscillating take-off unit is equip for get uniformly thickness of the film.

•       Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.

•       Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.

•       This machine could be combined different characteristics of plastic raw material in the same work.

•       Oscillating take-off unit is driven by heavy duty gear transmission system.

•       The gear transmission which is well precision and good stability can make the film more uniform of the thickness.

•       Its rotational angle could be attained to 359°.

•       It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.

•       Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.

•       The tonsillitis is controlled by low friction cylinder.

•       The bubble film could be covered approach of circle with calibration Basket type of fixed ring.

•       We are the professional manufacturer and experience supplier for multi-layer blown film extrusion.


Application of 
Blown Film Line :-

•       Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

•       Water Pouch Film

•       Milk Film

•       Edible Oil Film

•       Lamination Film

•       Liquid Packaging

•       Tea Packaging

•       Tomato Catch Up Packaging

•       Food Packaging Film

•       Stretch Cling Film
Blown Film Line


Additional Information:
  • Production Capacity: 150 - 300 ( kg/hr )
  • Delivery Time: 90 ( Days )
Yes! I am interested
Watch Video
Request CallBack
  • Multilayer Blown Film Machine
  • Multilayer Blown Film Machine
  • Multilayer Blown Film Machine
  • Multilayer Blown Film Machine
Multilayer Blown Film Machine
Get Best Quote

Multilayer Blown Film Machine

Approx. Price: Rs 55.51 Lakh / UnitGet Latest Price
Product Details:
Minimum Order Quantity1 Unit
BrandOCEAN INTERNATIONAL
Machine TypeAutomatic
Power Consumption146 - 194 ( kw )
Production Capacity150 - 300 ( kg/hr )
Driven TypeElectrical
Lay Flat Width600 - 1250 to 11400 - 2100 ( mm )
ColorBLUE / WHITE
Capacity150 - 300 ( kg/hr )
Plastic ProcessedEXTRUDER
Screw Diameter55 - 65 - 55 ( mm )
Voltage146 - 194 ( kw )
MaintenanceNo Maintenance
Lay Flat Width Range600 - 1250 to 11400 - 2100 ( mm )
Automation GradeAutomatic
Dimensions16 X 10 X 12 to 18 X 10 X 14 ( L X W X H )
Weight12 tom
Power SourceElectric
WinderTwo Station
Film Thickness20 - 150 ( Micron )
Range Of Thickness Of Wall Ceiling Panels20 - 150 ( Micron )
MaterialLD/ HM/ PP/ BIODEGRADABLE
Lay Flat Width And Diameter6000 - 1250 to 11400 - 2100 ( mm )

 

Introduction of Multilayer Blown Film Machine :-

Multilayer Blown Film Machine is a technology that is the most common method to make plastic  films, especially for the packaging industry. The process involves extruding a tube of molten polumer  through a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethylene  is used with this process, and other materials can be used as blends with these polymers. A diagram of a Multilayer Blown Film Machine.

The Multilayer Blown Film Machine

 

Typically, blown film extrusion is carried out vertically upwards, however horizontal and downward extrusion processes are now becoming more common.

This procedure consists of four main steps:

The polymer material starts in a pellet form, which are successively compacted and melted to form a continuous, viscous   liquid . This molten plastic is then forced, or extruded , through an annular die.

Air is injected through a hole in the center of the die , and the pressure causes the extruded melt to expand into a bubble. The air entering the bubble replaces air leaving it, so that even and constant pressure is maintained to ensure uniform thickness of the film.

The bubble is pulled continually upwards from the die and a cooling ring blows air onto the film. The film can also be cooled from the inside using internal bubble cooling. This reduces the temperature inside the bubble, while maintaining the bubble diameter.

After solidification t the frost line, the film moves into a set of nip rollers which collapse the bubble and flatten it into two flat film layers. The puller rolls pull the film onto windup rollers. The film passes through idler rolls during this process to ensure that there is uniform tension in the film. Between the nip rollers and the windup rollers, the film may pass through a treatment centre, depending on the application. During this stage, the film may be slit to form one or two films, or surface treated.

 Multilayer Blown Film Machine

Advantages of Multilayer Blown Film Machine :-

Blown film generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film.
Multilayer Blown Film Machine

Multilayer Blown Film Machine can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.

 Multilayer Blown Film Machine

Applications of Multilayer Blown Film Machine :-

Consumer food wrap from plastic wrap  article.

Agricultural  film

Bags

Industry packaging, shrink film , stretch film

Consumer packaging, food wrap, transport packaging ( Figure  )

Laminating  film

Barrier film

Multilayer film 

Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and  nanowire films.

 


Additional Information:
  • Production Capacity: 28 - 280 ( kg/hr )
  • Delivery Time: 90 Days
Yes! I am interested
Watch Video
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Cast Film Machine
Get Best Quote

Cast Film Machine

Approx. Price: Rs 55.51 Lakh / UnitGet Latest Price
Product Details:
Minimum Order Quantity1 Unit
Machine TypeAutomatic
Automation GradeAutomatic
ColorWhite/ Blue
BrandOcean International
I deal inNew Only

Cast films produced on chill roll lines have become an indispensable product in the packaging industry. They provide versatile and high-quality options for safe and economic packaging of products. To manufacture multi-ply packaging materials of 15 to 150 microns thickness, such as Stretch films, Cling films, Barrier films, Masking films, CPP films and Blister films.

The Extrusion Cast Sheet Line process is gaining increased popularity and enjoying sustained growth worldwide. New lines are being installed in a significant number and the market segments penetrated by this technology are on the rise. This article identifies the main components of a cast extrusion line and presents the fundamental aspects that require consideration when approaching cast film technology.


Applications:

 

Cast films are used for food and textiles packaging, flower wrapping, as photo album page protectors, as coating substrates in extrusion coating processes or laminated to other materials in the formation of more complex films, among others. Typically, the cast film process involves the use of coextrusion, which is a simultaneous extrusion of two or more materials from a single die to form a multi-layered film. This is because in many cases the final application of the plastic film demands a performance that cannot be achieved if the film is composed of only one material. For example, in many instances food packaging applications require the use of films with oxygen barrier capabilities. To meet the requirement a high oxygen barrier material like EVOH is combined with polyolefin materials in a multi-layered structure. Coextruded films typically contain up to seven layers; however, the use of more layers is becoming more common. The number of layers, their position in the coextrudate and their individual thickness are all variables that change depending on the particular application of the film.


Yes! I am interested
View PDF
Request CallBack
THREE LAYER  BLOWN FILM PLANT
Get Best Quote

THREE LAYER BLOWN FILM PLANT

Approx. Price: Rs 52 Lakh / UnitGet Latest Price

THREE LAYER BLOWN FILM PLANT – MACHINE – LINE – PRESS

Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

Multilayer blown film material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Multilayer Blown Film Plant is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer blown film line can also be produced with this machine.

 

Application:

•       Multilayer films are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.

•       Water Pouch Film

•       Milk Film

•       Edible Oil Film

•       Lamination Film

•       Liquid Packaging

•       Tea Packaging

•       Tomato Catch Up Packaging

•       Food Packaging Film

•       Stretch Cling Film


Additional Information:
  • Minimum Order Quantity: 1 Unit
Yes! I am interested

Explore more products

X
Looking for “Blown Film Line”?